Scalable 100% yield production of conductive graphene inks

A method for producing high quality, water-based conductive graphene inks with high concentrations has been developed by researchers from the Graphene Flagship working at the Cambridge Graphene Centre at the University of Cambridge, UK. The novel method uses ultrahigh shear forces in a microfluidization process to exfoliate graphene flakes from graphite. The process converts 100% of the starting graphite material into usable flakes for conductive inks, avoiding the need for centrifugation and reducing the time taken to produce a usable ink. The research is published in ACS Nano.

The inks produced by the microfluidization process have high concentrations of up to 100 g of graphene flakes per litre and can be optimised for screen printing. These inks can also be used to create novel composites, coatings and energy storage devices. This method can easily be applied to other layered materials, such as hexagonal boron nitride or transition metal dichalcogenides, to provide a family of printable circuit components — conductor, insulators and semiconductors — with which to build printed electronics with different functionalities. These inks are ideal for applications where low-cost is important.

With the 100% yield of the microfluidization method, it is now possible to produce high quality graphene inks in sufficient quantities for commercial products. Inks produced using this method have already been commercialised via a University of Cambridge spin out company, Cambridge Graphene, which was recently acquired by engineering solutions company Versarien. The inks are also supplied to Novalia, an innovative print company based in Cambridge, for use in their interactive touch-based printed electronic demos.

Dr. Panagiotis Karagiannidis, a researcher at the Cambridge Graphene Centre, is lead author of the work. “The motivation was the need for layers with low sheet resistance to be produced by screen printing using inks with high concentration. In the microfluidization process, all of the starting mixture experiences the same uniform intensive shear levels, converting it into a usable ink with high concentration. There is no wastage of material or time consuming post-processing.”

Researchers Stephen Hodge (left) and Panagiotis Karagiannidis (right) prepare graphene inks with the microfluizidation method. Credit: Cambridge Graphene Centre/Graphene Flagship

Prof. Andrea Ferrari is Director of the Cambridge Graphene Centre, Science and Technology Officer of the Graphene Flagship, and Chair of the Flagship Management Panel. He stated “This is an important conceptual advance, and will significantly help the innovation and industrialisation goals of the Graphene Flagship. The fact that the process is already licensed and commercialised indicates how it is feasible to cut the time from lab to market even during the lifetime of the Flagship.”

Chris Jones of Novalia said “For viable marketable applications, the materials need to be cost effective, easy to handle and show consistent performance. We ran these inks on ordinary industrial screen printing equipment without modification and achieved consistent results, printing hundreds of interactive demonstrators for Mobile World Congress. This is a very exciting point — a critical juncture between the laboratory and the public.”

Mar García-Hernandez of the Spanish National Research Council (CSIC) is the leader of the Graphene Flagship Work Package Enabling Materials, which is focused on development of scalable synthesis methods for graphene and other layered materials. “Microfluidization is a huge leap ahead towards applications of affordable and environmentally friendly graphene inks in organic photovoltaics, RFID antennas, electrically conductive coatings or nanocomposites. The method is certainly well suited for the synthesis of a variety of other layered material inks, which will enlarge the scope of applications of layered materials in real world devices.”

Story Source:

Materials provided by Graphene Flagship. Original written by Sophia Lloyd. Note: Content may be edited for style and length.

Microfluidics’ Microfluidizer range

Microfluidics offer a range of high pressure homogenisers designed to cater to their clients’ varied needs.

Lab- scale Microfluidizers are capable of working with a minimum volume of just 1 ml, whilst production equipment can handle  large scale batches suited to the highest regulatory demands. Microfluidizers are proven to be linearly scalable from the smallest scale lab machine to the largest production machine, a unique quality among comparable technologies.

Microfluidics technology and the Boston-based support team, can support your organisation every step of the way  from early-stage research, through to commercial production.

M-110P Microfludizer High Pressure Homogeniser
M-110P Microfludizer


Contact Us

Complete this form to send us an email and we'll get back to you as soon as possible.

Start typing and press Enter to search